Tip 6080 - Direct-acting 2/2-way plunger valve up to 900 bar

Opis tipa

The valve type 6080 is a direct-acting plunger valve for hydrogen applications. The plunger guiding tube and stopper are screwed together to increase the pressure resistance in contact with hydrogen. Certified 3.1 materials suitable for hydrogen and carbon-coated magnetic steels are used. Each valve is subject to a functional test at maximum nominal pressure. The external leakage at nominal pressure is 5x 10-5 mbar l/s. On request, the push-over coil can be provided as a Zone 1 or Category 2 explosion-proof version.

Hydrogen-resistant screwed fluid housing
Function test with forming gas at nominal pressure
Explosion-proof design ATEX and IECEx
Inspection holes for monitoring the process seal
Normally Open (NO) versions on request

Za pravilno izbiro izdelka upoštevajte tehnične podatke, ilustracije in navodila za predvideno uporabo v skladu s podatkovnim listom

Vrste uporabe in orodja

Prenosi

Podatkovni list

	Opis	Velikost datoteke	Jezik/država
	Data sheet Type 6080 \| Direct-acting 2/2-way plunger valve up to 900 bar	598,2 kB	EN / EU
	Datenblatt Typ 6080 \| Direktwirkendes 2/2-Wege Hubankerventil bis 900 bar	599,7 kB	DE / DE

Navodila za uporabo

Opis	Velikost datoteke	Jezik/država
Operating Instructions Type 6080 \| 2/2-way solenoid valve	354,4 kB	EN / EU
Bedienungsanleitung Typ 6080 \| 2/2-Wege Magnetventil	360,7 kB	DE / DE
Manuel d'utilisation Type 6080 \| Électrovanne 2/2 voies	345,7 kB	FR / FR

Izjava o skladnosti

	Opis	Velikost datoteke	Jezik/država
	EU-DoC\|EU Declaration DGRL, ROHS, MRL	39 kB	EN,FR,DE