Tip 8318 - Pressure transmitter with IO-Link interface
Opis tipa
The pressure transmitter measures and monitors relative pressure in liquids and gases. On request, the device is also available for absolute pressure measurement. The effect of the pressure on the sensor element generates a signal which is amplified, digitised and processed. Instead of an analogue output, this device offers a digital interface IO-Link. This interface allows bidirectional data transfer with any IO-Link master. Data access occurs through the available standardised IO Device Description (IODD). The IO-Link corresponds to the specification version 1.1. The bidirectional communication is used to read process data, parameters, diagnostic information and status messages as well as to set parameters. The two green LEDs are permanently lit as soon as power is supplied to the device. Once an IO-Link connection has been established, the LEDs flash. The switching behaviour and the switching thresholds of the digital outputs (maximum of 2, “PNP” or “NPN”) can, like many other parameters, be individually configured.
- Metallic thin film strain gauges measuring principle
- Process connections: G, NPT in ¼, G ¾ with hygienic flush diaphragm or clamp according to DIN 32676
- Measuring ranges for relative pressure from - 0.4…+ 0.4 bar up to - 1…+ 12.0 bar
- Available switching functions: PNP or NPN
- Access to measured value, device status and settings through IO-Link interface, very easy sensor replacement
Za pravilno izbiro izdelka upoštevajte tehnične podatke, ilustracije in navodila za predvideno uporabo v skladu s podatkovnim listom
Vrste uporabe in orodja
Prenosi
Podatkovni list
Navodila za uporabo
Programska oprema
Izjava o skladnosti
Opis |
Velikost datoteke |
Jezik/država |
|
|---|---|---|---|
|
|
EU-DoC|EU Declaration | 29 kB | EN,FR,DE |
|
|
EU-DoC|EU Material Compliance | 40,2 kB | EN |
|
|
EU-DoC|EU Material Compliance | 41,7 kB | FR |
|
|
EU-DoC|EU Material Compliance | 40,9 kB | DE |