Deli povezavo po e-pošti

Niso bila izpolnjena vsa zahtevana polja.

Pošlji e-pošto

Ali imate vprašanja?

Tip 6106 - 2/2- ali 3/2-smerni pnevmatski prevesni elektromagnetni ventil

Product Image Type 6106

Slikovni prikazi izdelkov se lahko razlikujejo od dejanske zasnove.

Upoštevajte tehnične lastnosti in podatkovne liste!

Opis tipa

Direktno delujoči prevesni elektromagnetni ventili tipa 6106 so posebej primerni za nevtralne plinaste medije. Dovod toplote v medij je minimalen, saj je ohišje od tuljave dodatno ločeno s ploščo iz nerjavnega jekla. Ventili so lahko nameščeni direktno na prirobnico ali na enojno ali večkratno priključno ploščo. Uporabljajo se lahko za doziranje, polnjenje, mešanje in distribucijo.

Kompaktna zasnova s širino na postajo 16 mm
DN 0,9 in DN 1,2 (10 barov)
Visoka tehnična življenjska doba
Nizka poraba električne energije in opcijska izvedba ATEX Ex ia
Za pnevmatske uporabe

Za pravilno izbiro izdelka upoštevajte tehnične podatke, ilustracije in navodila za predvideno uporabo v skladu s podatkovnim listom

Možnost kombiniranja z

Product Image Type 2516

Tip 2516

Vtičnica za napravo, oblika vtiča C po DIN...

Product Image Type 2505

Tip 2505

Kabelski vtič 10 mm za majhne...

Prikaži tabelo Pomanjšaj tabelo

Vrste uporabe in orodja

Prenosi

Podatkovni list

	Opis	Velikost datoteke	Jezik/država
	Type 6106 data sheet \| rocker solenoid valve for pneumaticapplications	1,4 MB	EN / EU
	Typ 6106 Datenblatt \| kompaktes Wippen-Magnetventil für Pneumatikanwendungen	1,4 MB	DE / DE
	Type 6105 fiches techniques \|	866,8 kB	FR / FR

Navodila za uporabo

	Opis	Velikost datoteke	Jezik/država
	Additional manual Type XXXX \|PX04 Use in the explosion-hazard area	135,6 kB	EN,FR,DE / EU
	Operating Instructions Type 6106 \| 3/2-way rocker solenoid valve	581,1 kB	EN,FR,DE
	Operating Instructions Type AC21, Typ X \| ATEX 2175 approval for solenoid coil AC21	1,1 MB	EN / EU
	Safety Manual \| Valves, Positioner \| Version -	597,8 kB	EN / EU
	使用说明书 AC21 型电磁线圈 \| 具有 II 2G EX i 认证的设备	1,6 MB	ZH / CN
	Bedienungsanleitung Typ AC21,Type X \| ATEX 2175 Zulassung für Magnetspule AC21	1,1 MB	DE / DE
	Manual de usuario Tipo 6106 \| Válvula magnética basculanteneumática	503,6 kB	ES / ES
	Manuel d'utilisation Type AC21, Type X \| ATEX 2175 homologation pour bobine AC21	1,1 MB	FR / FR

Izjava o skladnosti

	Opis	Velikost datoteke	Jezik/država
	EU-DoC\|EU Declaration	36,5 kB	EN,FR,DE

EU Material Compliance

	Opis	Velikost datoteke	Jezik/država
	EU-DoC\|EU Material Compliance	223,3 kB	EN
	EU-DoC\|EU Material Compliance	651,8 kB	DE
	EU-DoC\|EU Material Compliance	33,3 kB	FR

Št. artikla 126411

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126417

0,90 mm | -1,00 bar - 8,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126412

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 110,00 V - 120,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126413

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 220,00 V - 240,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126414

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126419

1,20 mm | -1,00 bar - 10,00 bar - D - normally open - inlet port 1 (P/NO) connected with outlet port 2 (B/ OUT), exhaust port 3 (R/NC) closed | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126421

0,90 mm | -1,00 bar - 8,00 bar - D - normally open - inlet port 1 (P/NO) connected with outlet port 2 (B/ OUT), exhaust port 3 (R/NC) closed | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 126422

0,90 mm | -1,00 bar - 8,00 bar - D - normally open - inlet port 1 (P/NO) connected with outlet port 2 (B/ OUT), exhaust port 3 (R/NC) closed | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 133525

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 134280

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 138319

1,60 mm | -1,00 bar - 1,00 bar - T - for universal use - port connections 1 (P/NC), 2 (A/in/out) and 3 (R /NO) depending on application | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 139031

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 12,00 V - 12,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 140054

2,00 mm | -1,00 bar - 1,00 bar - T - for universal use - port connections 1 (P/NC), 2 (A/in/out) and 3 (R /NO) depending on application | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 141073

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 142489

0,90 mm | -1,00 bar - 8,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 147994

2,00 mm | -1,00 bar - 1,00 bar - T - for universal use - port connections 1 (P/NC), 2 (A/in/out) and 3 (R /NO) depending on application | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 148047

0,90 mm | -1,00 bar - 8,00 bar - D - normally open - inlet port 1 (P/NO) connected with outlet port 2 (B/ OUT), exhaust port 3 (R/NC) closed | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 148701

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 220,00 V - 240,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Št. artikla 150392

1,20 mm | -1,00 bar - 10,00 bar - C - normally closed - inlet port 1 (P/NC), outlet port 2 (A/OUT) conecte dwith exhaust port 3 (R/NO) | direct-acting | 24,00 V - 24,00 V | -10,00 °C - 55,00 °C | PA (Polyamide) | FKM (Fluor rubber)

Primerjalni seznam

Vse lastnosti